Help get my HT oven up and running!!!

Ernie Swanson

SASSY PINK LUUNCHBOX KNIFE MAKER
Please Help get my HT oven up and running!!!

I just purchased a used Evenheat J.r. Kiln and I need a little help and direction.

I will post up pics of all I got and hopefully some of you can tell me how to put this together and what else I need.

I think I might need a new thermocouple but not sure, The one that came with seems kinda big.

Ok here are pics of everything with a description of what it is :)

2011-03-12_08-38-55_384.jpg

2011-03-12_08-39-02_936.jpg

2011-03-12_08-52-28_336.jpg





Ok here are the parts that came with it.

Not sure what kind of thermocouple this is. Has no numbers or anything
2011-03-12_08-48-32_584.jpg


This thermocouple just says: Pyromation K-
2011-03-12_08-50-36_213.jpg


This is the element
2011-03-12_08-51-24_46.jpg


This I think is a length of high temp wire
2011-03-12_08-50-15_172.jpg


Not to sure what this is, some kind of switch?
Says Cherry on it.
2011-03-12_08-49-41_711.jpg


This is an SSR, 480v, 25a. Wrong one I think for 110 setup
2011-03-12_08-49-00_763.jpg


This is another SSR, 60a/250v
2011-03-12_08-51-41_76.jpg


This is the pid, Model I think is TC-408A
2011-03-12_08-51-50_346.jpg


And in the wiring there is the normal wire to plug it in, then there is a little white wire with two small wires in it. I think this is for the thermocouple.
2011-03-12_09-37-29_365.jpg



After doing a little searching I found what I think is the thermocouple and element mounting plate
http://www.auberins.com/index.php?main_page=product_info&cPath=3&products_id=39
http://www.auberins.com/index.php?main_page=product_info&products_id=200

And this is the same type of PID I think
http://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=132

I am not sure if any of the SSR's will work for the setup I am doing.

Also do I need a heat sink for the SSR?

If any of you knowledgeable guys can help me out I would really appreciate it.
 
Last edited:
Congratulations on your score Ernie.

I know how to plug cords in an outlet and turn stuff on if it is clearly marked but other than that, I couldn't help you.

Good luck,
Carey
 
Back
Top