Forged Hunter SOLD
SOLD
This was forged from 1/4 inch 1084. The spine measures right at 7/32 now, forging marks were left on the flats. This one is shaving sharp and ready for work. Her are the specs:
Pics were taken prior to my mark being placed on the left side blade flat, but it does have one.
Steel- 1084 X 7/32 (Approximately)
AOL- 7 inches
Grind- Flat with serrations on spine
Blade- 2 5/8 inches
Handle- 4 1/4
Scales- Spalted Maple
Hardware- Brass pins and 1/4 inch tube
Sheath- RH pouch made from 7-8 ounce vegetable tanned leather
Asking 125.00 shipped in the USA or Canada
Paypal, USPS M/O, or certified check
Questions, or comments welcome
Thanks for looking
SOLD
This was forged from 1/4 inch 1084. The spine measures right at 7/32 now, forging marks were left on the flats. This one is shaving sharp and ready for work. Her are the specs:
Pics were taken prior to my mark being placed on the left side blade flat, but it does have one.
Steel- 1084 X 7/32 (Approximately)
AOL- 7 inches
Grind- Flat with serrations on spine
Blade- 2 5/8 inches
Handle- 4 1/4
Scales- Spalted Maple
Hardware- Brass pins and 1/4 inch tube
Sheath- RH pouch made from 7-8 ounce vegetable tanned leather
Asking 125.00 shipped in the USA or Canada
Paypal, USPS M/O, or certified check
Questions, or comments welcome
Thanks for looking
Last edited:
