Neck or belt knife

cardoso5fr

Well-Known Member
A small neck knife. I used simply file and dremel (angle grinder to cut the steel) Differential oil hardening
XC75 3mm thick
16,5cm long
7 cm sharp and 9cm of handle
G10 handle , 17mm thick
Cardofaction of the back and below of the handle in order to have something "new old".
The G10 cove not all the heel in order to be able to hit the heel if the blade is in a wood piece
ABS sheath with a leather piece to be able to horizontal carry.

DSC08707.jpg

DSC08708.jpg

DSC08709.jpg

DSC08710.jpg

DSC08711.jpg

DSC08712.jpg

DSC08713.jpg

DSC08714.jpg

DSC08716.jpg

DSC08717.jpg

DSC08718.jpg

DSC08719.jpg

DSC08720.jpg
 
Great looking little wharncliffe. I love that blade shape for an edc knife. Will do just about anything well.
 
Looks good to me. Looks extremely comfortable, and I really like the sheath too.
 
Thank you :). It's good in hand:). For the sheath that is the first time i used that system and i think i will often make something in that spirit :D
 
Looks like a good EDC and I like the Wharncliffe design. The sheath is a good design, makes the knife handy to get to. Great job.

Larry
 
Thank you very much. I think there will be some sheath in that spirit in the futur. That is finaly efficient and give two possibility of carry without a lot of extra weight :D
 
Back
Top